DATA-0185
Product Datasheet for the Melexis TH8056 CAN Transceiver IC

Features

The TH8056 is a physical layer device for a single wire data link capable of operating with various CSMA / CR protocols such as the Bosch Controller Area Network ( CAN ) version 2.0. This serial data link network is intended for use in applications where a high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and the microprocessor and/or dedicated logic devices which use the network.

The network shall be able to operate in either the normal data rate mode or the high speed data download mode for assembly line and service data transfer operations. The high speed mode is only intended to be operational when the bus is attached to an off-board service node. This node shall provide temporary bus electrical loads which facilitate higher speed operation.

The bit rate for normal communications is typically 33.33Kbps, for high speed transmissions like described above a typical bit rate of 83.33Kbps is recommended. The TH8056 is designed in accordance to the Single Wire CAN Physical Layer Specification GMW3089 V2.x and supports many additional features like undervoltage lockout, timeout for faulty blocked input signals, output blanking time in case of bus ringing and a very low sleep mode current

Support documents for the TH8056

Below is the support information available for the TH8056 - select a link to download the relevant documentation.

DATA-0185 - Product Datasheet
Product Datasheet for the Melexis TH8056 CAN Transceiver IC
Dated : 22 December 2005 ( Uploaded )
Relevant to : TH8056

News information for the TH8056

Below is the news information available for the TH8056 - select a link to view the relevant information.

Sorry, no news information is available for this product.