Sensor Interfaces
Please select from one of the following or use the product selector menu on the left.
MLX16303
Two identical interface channels, Two connection modes, 16-bit standard SPI, Microcontroller control / diagnosis, Supply voltage / 45mA current / Current-limit / Analogue feedback loop per channel, Short-circuit / High-voltage protection, High immunity Sensor Interface IC
MLX16305
6 Sense Channels, Large supply current / supply voltage range, Applicable with 2-wire Hall switches, Diagnosis open wires, Supply / Wire shorts, Current / Voltage measurement mode, 5% measurement accuracy, Current limiter, 40V Load Dump, Over-temperature Sensor Interface IC
MLX90308
6V to 35V, Microprocessor-controlled signal conditioning, Reduction of non-linearity by programmable coefficients, External / Internal temperature compensation, Versatile output signal ranges ( 4V / 5V / 10V / 11V and 4mA to 20 mA loop ) Sensor Interface IC
MLX90314
6V to 35V, Microprocessor-controlled signal conditioning, Reduction of non-linearity by programmable coefficients, External / Internal temperature compensation, Versatile output signal ranges ( 4V / 5V / 10V / 11V and 4mA to 20 mA loop ), High gain Sensor Interface IC
MLX90320
Temperature compensation for gain and offset, External / Internal temperature sensor, Over-voltage protection, Fault detection and clamping levels, Ratiometric output, Single-pin digital programming, Fully analogue signal path Sensor Interface IC
MLX90323
6V to 35V, Microprocessor-controlled signal conditioning for bridge-type sensors, Reduction of non-linearity by programmable coefficients, External or internal temperature sensor, 4mA to 20mA current loop output, Mass calibration, 2400 or 9600 baud UART Sensor Interface IC
MLX90326
Analogue 0-5V ratiometric output, Single pin programming (through output), Fast response time, Extended temperature range, Cost effective “electronic trimming”, Second order compensation of offset and gain, Internal temperature sensor Sensor Interface IC