BeanAir SUN-TH BeanDevice® Features Four Measurement Technologies
Light, Temperature, Humidity and Dew Point measurement in a small casing
 

The BeanAir BND-SUN-TH BeanDevice® is a wireless sensor integrating four measurement technologies - Light, Temperature, Humidity and Dew Point.

Packaged in an ultra light enclosure just 55mm x 53mm x 35mm and weighing less than 100 grams, the BND-SUN-TH offers great accuracy (humidity ±1.8% RH, temperature ±0.2°C) and high long term stability (humidity < 0.5% RH/year, temperature < 0.05K/year).

Ideally suited for monitoring in laboratories, hospitals, cold chains, clean rooms and greenhouses, the BND-SUN-TH incorporates an onboard data logger (up to 32700 logs), an IP66/67 casing and a 1300mAh Lithium primary cell. A calibration certificate (standard connected COFRAC) is also available on request.

The main features of the BeanAir BND-SUN-TH BeanDevice® are as follows :-

• Temperature measurement range : -40°C to +75°C with an accuracy of ± 0.2°C

• Humidity measurement range : 0-100%RH with an accuracy of ±1.8% RH

• Pressure Dew point measurement

• Sensor head chemical resistant and Dew formation resistant

• Light sensor measurement range : 0.1Lux to 40000Lux

• Small ( 55 mm x 53 mm x 35 mm) watertight enclosure (IP66/IP67)

• Ultralow power consumption technology IEEE 802.15.4 : Current consumption in idle mode < 15uA with a maximum autonomy of 7 years

• Maximum range : 300m line of sight

• Embedded Data Logger : up to 32700 data acquisition records (with events dating)

• Entirely autonomous system : powered by Lithium-thionyl chloride primary battery

• Plug and Play installation : requires no knowledge of wireless technology

BeanAir is a French manufacturer and designer of smart and rugged Wireless Sensor Networks dedicated to industrial machine monitoring, embedded measurement, structural engineering, energy management solution, isolated sites & process industry. BeanAir® provides wireless sensors for both dynamic measurement (vibration, shock and deformation) as well as static measurement (temperature, humidity, tilt, binary and analogue measurement). Beanair’s wireless technology offers very high stability in harsh environments.

Products related to this article

Below are the products related to this article - select a link to view the particular product page.

BND-SUN-TH
IP65 watertight enclosure, -40°C to +70°C temperature sensor, 0% to 100% RH Capacitive Humidity sensor, 0.1Lux to 40000Lux measurement range, <15μA idle current consumption, 300m LOS range, IEEE 802.15.4, 1M data records, 1300mAh battery Wireless Light, Temperature & Humidity Sensor BeanDevice