Melexis Products
Below is a detailed list of the products available from Melexis Semiconductors. To view a particular range or product, select the approriate link.
TH8056
Single Wire CAN compatible, 30uA Sleep Mode, 5V to 27V, 100Kbaud rate, 40Kbaud bus, Low RFI, Integrated receiver filter, Load-dump / Jump-start / Thermal-overlaod / Short-circuit / Loss-of-ground / 4KV ESD protection CAN Transceiver IC
TH3122
5V to 16V, -24V to 30V Bus Input, ISO 9141 and ODBII compatible, Very low standby current in normal and sleep mode, Linear low drop voltage regulator, 5V 100mA current limited output, Load-dump protection, Over-temperature shutdown K-Bus Transceiver IC
MLX80103
6V to 18V, 10uA Standby current, -40degC to +125degC, 6x6 MLF package, Over-temperature Shutdown, 45V Load dump protection, LIN2.0 and J2602, 19.2KBaud, 12MHz Internal RC, Slew rate control, High EMI immunity, 30/13 configurable I/O, 3 x PWM and 3 x ADC LIN Controller IC
MLX80104
Internal 12 MHz RC-Oscillator, 16-bit MULAN MCU, 16kB ROM, 512 Byte RAM, 192 Byte EEPROM with ECC, 19.2 kBaud, Frame processing, LIN 2.x and SAE J2602, low current consumption, -40°C to +125°C, Small MLF 5x5 28pin package LIN Controller IC
MLX80105
Internal 12 MHz RC-Oscillator, 16-bit MULAN MCU, 16kB ROM, 512 Byte RAM, 192 Byte EEPROM with ECC, 19.2 kBaud, Frame processing, LIN 2.x and SAE J2602, low current consumption, -40°C to +125°C, Small MLF 5x5 28pin package LIN Controller IC
MLX81100
7V to 18V, <50uA Standby current, -40degC to +125degC, 6x6 MLF package, 40V Load dump protection, LIN2.0 and J2602, 100KBaud, Internal RC, 8-bit PWM and 16-channel 10-bit ADC, Dual RISC CPU / 2KB RAM / 32KB Flash / 128B EEPROM LIN Controller IC
MLX80001
Compliant to LIN Specification Version 1.3, 2.x and J2602, 4-channel independent enhanced master transceiver function, Fully integrated receiver filter, LIN short to ground protection, Control output for voltage regulator, Low power Consumption LIN Transceiver IC
MLX80020
5V to 27V, LIN2.0 and J2602, 10.4kBaud, Very low standby current consumption, Fully compatible to 3.3V and 5V devices, Enhanced ESD robustness according to IEC 61000-4-2, RoHs compliant and AECQ-100 qualified LIN Transceiver IC
TH8062
6V to 18V, 15uA Standby current, -40degC to +125degC, SO8 package, Over-temperature Shutdown, 40V Load dump protection, LIN2.0 and J2602, 20KBaud, Internal RC, Slew rate control, High EMI immunity LIN Transceiver IC
TH8080
6V to 18V, -27V to 40V Bus Input, ISO 9141 compatible, 24uA Sleep mode, Slew rate control, 20Kbaud rate, Integrated receiver filter, High EMI Immunity, Internal 30KOhm slave termination, Thermal-overlaod / Loss-of-ground / 4KV ESD protection LIN Transceiver IC
TH8082
6V to 18V, -27V to 40V Bus Input, ISO 9141 compatible, 24uA Sleep mode, Slew rate control, 20Kbaud rate, Integrated receiver filter, High EMI Immunity, Internal 30KOhm slave termination, Thermal-overlaod / Loss-of-ground / 4KV ESD protection LIN Transceiver IC
MLX90285
1-chip solution ( hall element + output drivers ), Soft switching for low noise, Active slope control, 2-stage thermal protection, Locked rotor protection and auto-restart, Tachometer / Alarm open drain output Fan Motor Driver IC
MLX90287
4.5V to 16V, Direct PWM input, Intelligent soft start, Minimal speed setting, Built-in PWM input resistor, Optimum low noise performance, Reverse Voltage / Locked Rotor / Brown-Out / Thermal Shutdown / FG output short circuit Protection Fan Motor Driver IC
US168
7V, SOT23 package, Integrated Tachometer output, Soft switching, Full bridge single coil driver, High sensitivity Hall sensor, Low power consumption, Reverse voltage protection, Locked rotor / Thermal protection with auto-restart Fan Motor Driver IC
US169
7V, SOT23 package, Rotation Detection output, Soft switching, Full bridge single coil driver, High sensitivity Hall sensor, Low power consumption, Reverse voltage protection, Locked rotor / Thermal protection with auto-restart Fan Motor Driver IC
US62
18V, TO-92 package, Integrated Tachometer output, Low cost, High sensitivity Hall sensor, Locked rotor protection with auto-start, Power efficient CMOS and power MOSFETs, Built-in output protection clamping diode Fan Motor Driver IC
US63
18V, TO-92 package, Rotation Detection output, Low cost, High sensitivity Hall sensor, Locked rotor protection with auto-start, Power efficient CMOS and power MOSFETs, Built-in output protection clamping diode Fan Motor Driver IC
US651
12V to 18V, SO8 package, Integrated Tachometer output, Soft switching, Slope control setting, Reverse voltage protection, Locked rotor / Thermal protection with auto-restart Fan Motor Driver IC
US661
12V to 18V, SO8 package, Rotation Detection output, Soft switching, Slope control setting, Reverse voltage protection, Locked rotor / Thermal protection with auto-restart Fan Motor Driver IC
US72
Full Bridge Driver, High Sensitivity Hall Sensor, Locked-Rotor Shutdown and Auto-Restart, Efficient Power MOSFETs, Integrated Tachometer Signal Output Fan Motor Driver IC
US73
Full Bridge Driver, High Sensitivity Hall Sensor, Locked-Rotor Shutdown and Auto-Restart, Efficient Power MOSFETs, Integrated Alarm Signal Output Fan Motor Driver IC
US79
5V / 12V, Reverse-voltage protection, RFI Filter, Efficient CMOS and Power MOSFET Drivers allow 400mA without overheating, Zener Diode protected outputs, High Sensitivity for switching symmetry, Locked Rotor Shutdown and Auto-restart Fan Motor Driver IC
US890
18V, TO-92 package, Integrated Tachometer output, 1200mA peak output current, Low startup voltage, High sensitivity Hall sensor, Locked rotor protection with auto-start, Power efficient CMOS and power MOSFETs, Built-in output protection clamping diode Fan Motor Driver IC
US891
18V, TO-92 package, Rotation Detection output, 1200mA peak output current, Low startup voltage, High sensitivity Hall sensor, Locked rotor protection with auto-start, Power efficient CMOS and power MOSFETs, Built-in output protection clamping diode Fan Motor Driver IC
US90A
Low cost, High sensitivity Hall Sensor, Locked rotor protection and auto-restart, Power-efficient CMOS and power MOSFETs, Built-in output protection clamping diode, Integrated tachometer signal output Fan Motor Driver IC
US91A
Low cost, High sensitivity Hall Sensor, Locked rotor protection and auto-restart, Power-efficient CMOS and power MOSFETs, Built-in output protection clamping diode, Integrated alarm signal output Fan Motor Driver IC
MLX10407
12V, Interfaces directly with 5V CMOS logic MCUs Serial link, 2 x 360-degree and 3 x 90-degree simultaneous actuator drive capability, Open-circuit / short-circuit detection, Real-time angle tracking Gauge Driver IC
MLX10420
Supply voltage up to 12 V, Interface directly with 3.3V/5V CMOS logic μP, Serial peripheral interface, Can drive two air core actuators over the full 360° and one over 90°, Open circuit or short circuit detection, Real time angle tracking Triple Air Core Gauge Driver IC
MLX10803
6V to 32V DC input range, High energy efficiency, Temperatue dependant regulation using external NTC resistor, Built-in randomizer for improved EMC performance, High temperature opoeration capability, 80V load dump protection, PWM dimming LED Driver IC
MLX80151
SIL 3 capable, Embedded 16-bit uC, 3x16-bit timers, 8kB OTP, 256B RAM, 128B EEPROM, Autosequence 10-bit ADC with DMA, High Side / Low Side shunt amplifier and NFET Half bridge pre-driver with double stage charge pump High Current NFET Half Bridge Motorcontroller IC
MLX81200
Very robust, Wide dynamic range, Fast start-up / accelerate / run under unknown load conditions, Low noise operation, Block / trapezoidal / sinusoidal motor currents, Delta and star motor configuration, High Integration level Sensorless BLDC Motorcontroller IC
MLX90283
5V, QFN6 package, Low current consumption, Active Start, High efficiency, High sensitivity Hall sensor, Full bridge output driver, Reverse-voltage protection, Thermal protection Motor Driver IC
MLX90224
4.5V to 26V, Dual output, Chopper stabilized Amplifier stage, Phase / Direction detection Hall Effect Latch IC
MLX92211
2.7V to 24V, Very high magnetic sensitivity, Chopper-stabilized amplifier stage, Built-in negative temperature coefficient, Reverse supply / Undervoltage lockout / Thermal protection, Output current limit with auto-shutoff Hall Effect Latch IC
MLX92213
1.6V to 3.6V, Latching output behaviour, Micropower Consumption, Advanced power manageability through dedicated “Enable” pin, Ultrahigh sensitivity hall sensor, Push-Pull output Hall Effect Latch IC
MLX92251
2.7V to 24V, Two integrated hall plates for direction detection, Latching magnetic characteristics, Speed and Direction open-drain outputs, Excellent temperature stability, Reverse supply / Undervoltage Protection, Output current limit with auto-shutoff Hall Effect Latch IC
US1881
3.5V to 24V, +/-50G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Ultra-low IDD current Bipolar Hall Effect Latch IC
US2881
3.5V to 24V, +/-20G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Ultra-low IDD current Bipolar Hall Effect Latch IC
US3881
2.2V to 18V, +/-50G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Ultra-low IDD current Bipolar Hall Effect Latch IC
US4881
2.2V to 18V, +/-20G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Ultra-low IDD current Bipolar Hall Effect Latch IC
MLX90215
Quad switched hall plate, Chopper stabilized amplifier stage, Ratiometric output for ADC interface, Very low quiescent voltage temperature-drift, Adjustable Quiescent voltage / Sensitivity / Temperature compensation Hall Effect Sensor IC
MLX90217
Rotary Position Geartooth Sensor, Short Circuit Protection, On-chip 10 bit ADC, Self-adjusting magnetic range, High-speed operation, Zero chopper delay, No rotary orientation concerns, Zero speed detection Hall Effect Sensor IC
MLX90242
2.5V quiescent voltage, 40mV/mT sensitivity, Quad switched hall plate, Chopper stabilized amplifier stage, Ratiometric output for ADC interface, Low quiescent voltage temperature-drift Hall Effect Sensor IC
MLX90251
Quad switched hall plate, Chopper stabilized amplifier stage, Ratiometric output for ADC interface, Adjustable Voltage temperature-drift / Quiescent voltage / Sensitivity / Temperature compensation / Clamping voltage / Low-pass filter / Internal Bias Hall Effect Sensor IC
MLX90254
Differential hall sensor, Low power consumption, Excellent repeatability performance, Large airgap range, Large supply voltage range Hall Effect Sensor IC
MLX90248
2.5V, Chopper stabilized amplifier stage, Micropower consumption for battery-powered applications, Omnipolar Hall Effect Sensor IC
MLX90288
Analogue ratiometric output, 6mT to 650mT, Digital IIR filtering, Offset trimming, 1st and 2nd order magnet temperature coefficient compensation, Reverse polarity / Overvoltage protection, Extensive diagnostic features Hall Effect Sensor IC
MLX90291
Programmable Hall effect sensor, 12-bit 125Hz PWM output, Switch function, ±15mT to ±400mT, Low noise output signal (PWM jitter), Programmable through the connector, 16-bit customer ID number Hall Effect Sensor IC
MLX90292
Programmable Hall effect sensor, 12-bit magnetic flux density, 8-bit temperature, Extensive diagnostics, Embedded µ-controller, Piecewise linearization, 2-Wire PAS4/PSI5 Mode, 2-/3-Wire PWM Mode, Dual die, ±30mT to ±170mT, 48-bit customer ID Hall Effect Sensor IC
US2882
3.5V to 24V, +/-20G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Ultra-low IDD current Unipolar Hall Effect Switch IC
US2884
3.5V to 24V, +/-20G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Ultra-low IDD current Unipolar Hall Effect Switch IC
US5681
3.5V to 24V, South-pole active direct output polarity, High magnetic sensitivity (5.5mT typical operating point), Chopper-stabilized amplifier stage, Open drain output Unipolar Hall Effect Switch IC
US5682
3.5V to 24V, South-pole active inverted output polarity, High magnetic sensitivity (5.5mT typical operating point), Chopper-stabilized amplifier stage, Open drain output Unipolar Hall Effect Switch IC
US5781
3.5V to 24V, 120G / 70G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Low power consumption Unipolar Hall Effect Switch IC
US5782
3.5V to 24V, 120G / 70G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Low power consumption Unipolar Hall Effect Switch IC
US5881
3.5V to 24V, 250G / 200G, Chopper stabilized amplifier stage, Optimized for Brushless DC motor applications, New miniature high reliability package, Low power consumption Unipolar Hall Effect Switch IC
MLX75411
1/3” Optical format at 1024 x 512 WVGA, 1/4” Optical format at 640 x 480 VGA, Monochrome / RGB (2 versions: RGBG and RGBi) / RCCC, -40°C to +115°C, 154dB extended High Dynamic range, Superior low-light sensitivity, On-chip image processing Avocet Image Sensor IC
MLX75412
1/3” Optical format at 1024 x 512 WVGA, 1/4” Optical format at 640 x 480 VGA, Monochrome / RGB (2 versions: RGBG and RGBi) / RCCC, -40°C to +115°C, 154dB extended High Dynamic range, Superior low-light sensitivity, On-chip image processing Avocet Image Sensor IC
MLX75605
3.3V, Integrated test mode for emitted power adjustment, Integrated memory for on-chip parameter trimming, Embedded ferrule clamp for connection to 1 mm core PMMA POF, 650nm wavelength, 150Mbps speed, Low Voltage Differential Signal I/Os, Sleep mode Fibre Optic Transceiver IC
MLX75608
Suitable for 1mm automotive PMMA Plastic Optical Fiber (POF), Includes 650nm LED and a PIN photodiode, Data Communication rate up to 25 Mb/s (biphase) and 50 Mb/s (non return to zero), Robust to electromagnetic disturbances, Laser Class 1 Compliant Fibre Optic Transceiver IC
MLX75006
3.3V, Camera-on-a-chip CIF resolution ( 352 x 288 pixels ), 10um x 10um pixels, High sensitivity, High dynamic range, Linear / Bi-linear / Triple slope / Logarithmic response, Low noise, Synchronous shutter, SPI programmable, Standby mode, High frame rate Image Sensor IC
MLX75307
3.3V, Low noise, High speed, High sensitivity, High dynamic range, Low dark current and high dark current doubling temperature, SPI, I2C, Command mode, External trigger, Fully programmable in one frame, 10-50 MHz, 0.15us - 150ms Image Sensor IC
MLX75308
3.3V, Programmable dynamic range, Versatile digital SPI interface, 16-bit ADC readout, Internal pre-driver, Diagnostic and internal watchdog features, 2 x rain channels and 3 x ambient channels, Sleep and standby modes Rainlight Sensor Interface Image Sensor IC
MLX75306
3.3V, 142 customer pixels, 100µm height, 50µm pitch. 7.1mm length, Flat pixel response under uniform light, SPI control: MOSI/MISO/CS/SCLK, Internal ADC, Read-out speed up to 12MHz, Integrated Temperature Sensor Optical Array IC
MLX90255
5V, Linear Optical Array, 128 x 1 sensor-element organization, 385dpi sensor pitch, High linearity / uniformity for 256 gray-scale, High sensitivity, Special gain compensation for single LED, Output reference to ground, Low image lag, Up to 1MHz operation Optical Array IC
MLX75303
Very high photo sensitivity, 4.1V to 5.5V, TTL and CMOS compatible, Open drain output, Active low output signal, Lead free component, Suitable for lead free soldering profile 260°C ( target ), Ideal for automotive applications Optical Switch SensorEyeC
MLX75305
3V to 5.5V, High linear response, Fast switching under strong light conditions, Low temperature dependency, Precise response over temperature Light-to-Voltage SensorEyeC
MLX71120
300MHz to 930Hz, FM / FSK / ASK, QFN32 package, Low current consumption in active mode, Very low standby current, RSSI allows signal strength indication, 455KHz or 10.7MHz external IF filters, Internal FSK demodulator,Output noise cancellation filter RF Receiver IC
MLX71121
300MHz to 930Hz, FM / FSK / ASK, QFN32 package, Low current consumption in active mode, Very low standby current, RSSI allows signal strength indication, Internal IF filter, Internal FSK demodulator,Output noise cancellation filter RF Receiver IC
MLX71122
300MHz to 930Hz, FM / FSK / ASK, QFN32 package, 8-channel pre-configured / Fully programmable SPI mode, Low current consumption in active mode, Very low standby current, AFC / AGC control, RSSI allows signal strength indication, Internal IF filter RF Receiver IC
TH71101
315MHz / 433MHz, FM / FSK / ASK, Low current consumption in active mode, Very low standby current, RSSI allows signal strength indication, Switchable LNA gain for improved dynamic range, Single conversion superheterodyne architecture RF Receiver IC
TH71102
315MHz / 433MHz, FM / FSK / ASK, Low current consumption in active mode, Very low standby current, RSSI allows signal strength indication, Switchable LNA gain for improved dynamic range, Double conversion superheterodyne architecture RF Receiver IC
TH71111
868MHz / 915MHz, FM / FSK / ASK, Low current consumption in active mode, Very low standby current, RSSI allows signal strength indication, Switchable LNA gain for improved dynamic range, Single conversion superheterodyne architecture RF Receiver IC
TH71112
868MHz / 915MHz, FM / FSK / ASK, Low current consumption in active mode, Very low standby current, RSSI allows signal strength indication, Switchable LNA gain for improved dynamic range, Double conversion superheterodyne architecture RF Receiver IC
TH7122
27MHz to 930MHz, FSK / FM / ASK, Stand-alone fixed-frequency / Programmable multi-channel user modes, Low active / standby power consumption, PLL-stabilized RF VCO ( LO ) + varactor, On-chip AFC, RSSI allows signal strength indication, Switchable LNA gain RF Transceiver IC
TH71221
27MHz to 930MHz, FSK / FM / ASK, Stand-alone fixed-frequency / Programmable multi-channel user modes, Low active / standby power consumption, PLL-stabilized RF VCO ( LO ) + varactor, On-chip AFC, RSSI allows signal strength indication, Switchable LNA gain RF Transceiver IC
MLX72013
425MHz to 445MHz, 1.95 V to 5.5 V, PLL-stabilized VCO, Single-ended RF output, High FSK deviation, -40°C to +125°C, Very low standby current, On-chip low voltage detector, High over-all frequency accuracy, -16dBm to +12dBm, 3.5mA to 15.9mA RF Transmitter IC
TH72001
315MHz, FSK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72002
315MHz, ASK, 1.95V to 5.5V, Single ended RF output, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72005
315MHz, FSK / ASK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72006
315MHz, FSK / ASK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72011
433MHz, FSK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72012
433MHz, ASK, 1.95V to 5.5V, Single ended RF output, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72015
433MHz, FSK / ASK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72016
433MHz, FSK / ASK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72031
868MHz / 915MHz, FSK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72032
868MHz / 915MHz, ASK, 1.95V to 5.5V, Single ended RF output, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72035
868MHz / 915MHz, FSK / ASK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
TH72036
868MHz / 915MHz, FSK / ASK, 1.95V to 5.5V, Single ended RF output, FSK by crystal pulling, ASK by OOK of PA, High frequency accuracy, Low standby current, Low voltage detector, Adjustable output power / current consumption RF Transmitter IC
MLX90109
125kHz, Unique parallel antenna, No external reference, No zero modulation problems, On chip decoding ( Biphase / Manchester ASK ), Baud rate selectable "on-chip" filtering, Open drain data / clock outputs, Power down mode, OOK downlink communication RFID Transceiver IC
MLX90121
13.56MHz, Conforms with ISO / IEC 14443A / B & 15693, Provision for EPC standard compliance, Programmable encoder and decoder for custom protocols, Low external component count RFID Transceiver IC
MLX90132
3.3V, Conforms with ISO/IEC 18092 (NFC), Conforms with ISO/IEC 14443 A and B, Conforms with ISO/IEC 15693 or ISO/IEC 18000-3 mode 1, Standard SPI interface with 256 Bytes Buffer, High speed communication (848kbit/s), Embedded RF field and TAG detectors RFID Transceiver IC
MLX90129
13.56MHz, Compliant with ISO 15693, Programmable resonance capacitor, Versatile interface for single-ended or differential sensors, 12-bit A/D converter, 4K-Bit integrated E2PROM, Slave / Master SPI interface, Power / Asset management, Data-logging RFID Transponder IC
MLX90210
0Bar to 1.0Bar range, Differential pressure sensor, High long-term stability, Compact design, Low cost Pressure Sensor IC
MLX90807
<1% error range, Programmable, Trimmable offset / sensitivity, On-chip signal conditioning, 5V analogue ratiometric / Rail-to-rail output, Diagnostics of broken supply wires and broken sensor, Short-circuit protection Relative Pressure Sensor IC
MLX90808
<1% error range, Programmable, Trimmable offset / sensitivity, On-chip signal conditioning, Ratiometric / Rail-to-rail output, Diagnostics of broken supply wires and broken sensor, Short-circuit protection Absolute Pressure Sensor IC
MLX91801
Low-Power, Pressure-Temperature-Battery monitor, Up to 1400kPa, 1% precision, 0.25µA sleep, 340µA run mode, Temperature compensation, Diagnostics for system error detection, Motion detection, 4000G shock survival, 7 GPIO pins RKE Compatible Tyre Pressure Monitor Sensor IC
MLX16303
Two identical interface channels, Two connection modes, 16-bit standard SPI, Microcontroller control / diagnosis, Supply voltage / 45mA current / Current-limit / Analogue feedback loop per channel, Short-circuit / High-voltage protection, High immunity Sensor Interface IC
MLX16305
6 Sense Channels, Large supply current / supply voltage range, Applicable with 2-wire Hall switches, Diagnosis open wires, Supply / Wire shorts, Current / Voltage measurement mode, 5% measurement accuracy, Current limiter, 40V Load Dump, Over-temperature Sensor Interface IC
MLX90308
6V to 35V, Microprocessor-controlled signal conditioning, Reduction of non-linearity by programmable coefficients, External / Internal temperature compensation, Versatile output signal ranges ( 4V / 5V / 10V / 11V and 4mA to 20 mA loop ) Sensor Interface IC
MLX90314
6V to 35V, Microprocessor-controlled signal conditioning, Reduction of non-linearity by programmable coefficients, External / Internal temperature compensation, Versatile output signal ranges ( 4V / 5V / 10V / 11V and 4mA to 20 mA loop ), High gain Sensor Interface IC
MLX90320
Temperature compensation for gain and offset, External / Internal temperature sensor, Over-voltage protection, Fault detection and clamping levels, Ratiometric output, Single-pin digital programming, Fully analogue signal path Sensor Interface IC
MLX90323
6V to 35V, Microprocessor-controlled signal conditioning for bridge-type sensors, Reduction of non-linearity by programmable coefficients, External or internal temperature sensor, 4mA to 20mA current loop output, Mass calibration, 2400 or 9600 baud UART Sensor Interface IC
MLX90326
Analogue 0-5V ratiometric output, Single pin programming (through output), Fast response time, Extended temperature range, Cost effective “electronic trimming”, Second order compensation of offset and gain, Internal temperature sensor Sensor Interface IC
MLX90614
-40degC to 125degC sensor / -70degC to 380degC object temperature, 0.5degC accuracy over wide temperature range, High ( medical ) accuracy calibration, Measurement resolution of 0.02degC, Single / Dual zone versions, SMBus compatible digital interface Temperature Sensor IC
MLX90615
3V, Small size, Factory calibrated, -40°C to +85°C sensor temperature, -40°C to +115°C object temperature, 0.5°C accuracy (0°C to +50°C), 0.1°C Medical accuracy (limited range), 0.02°C resolution, SMBus compatible, Customizable PWM output Temperature Sensor IC
CSA-1V
Very high sensitivity, Linear output voltage proportional to magnetic field, Wide-band ( DC to 100kHz ), Isolated from current conductor, Very low offset and offset-drift, Very low noise Triaxis™ Current Sensor IC
MLX91205
Triaxis™ technology, Zero power loss in primary circuit, Very high sensitivity, Excellent nonlinearity, Wideband ( DC to 100kHz ), Isolated from current conductor, Very low offset and offset drift, Very low noise Triaxis™ Current Sensor IC
MLX91206
Triaxis™ technology, Programmable, Fast response, Wideband ( DC to 90kHz ), Over voltage / reverse polarity protection, Broken track diagnostic, Fast analogue / PWM / Ratiometric / Thermometer outputs, Programmable switch function, 17-bit ID number Triaxis™ Current Sensor IC
MLX91207
Triaxis™ technology, Programmable, Fast response, Wideband ( DC to 70kHz ), Over voltage / reverse polarity protection, Broken track diagnostic, Fast analogue / Ratiometric / Thermometer outputs, Programmable switch function, 17-bit ID number Triaxis™ Current Sensor IC
MLX90316
Triaxis™ technology, Absolute rotary position sensor, Simple and robust magnetic design, Programmable angular range to 360-deg, Programmable linear tranfer characteristic, Selectable Analogue ( Ratiometric ) / PWM / Serial protocol, 40-bit ID Triaxis™ Position Sensor IC
MLX90324
Triaxis™ technology, Absolute rotary position sensor, 12-bit Resolution, 10-bit Angular Accuracy, Analogue (Ratiometric) / PWM / SENT outputs, Programmable Linear Transfer Characteristic, Broken Track Diagnostic, 48-bit ID Number Triaxis™ Position Sensor IC
MLX90333
Triaxis™ technology, Absolute 3D position sensor, Simple and robust magnetic design, Programmable angular range to 360-deg, Programmable linear tranfer characteristic, Selectable Analogue ( Ratiometric ) / PWM / Serial protocol, 40-bit ID Triaxis™ Position Sensor IC
MLX90360
Triaxis™ technology, Absolute Rotary and Linear Position Sensor, Programmable Measurement Range, Programmable Linear Transfer Characteristic, Analogue output, 12-bit Angular Resolution, 10-bit angular thermal accuracy, 48-bit ID Number Triaxis™ Position Sensor IC
MLX90363
Triaxis™ technology, On-chip signal processing, High speed serial interface (SPI compatible), Enhanced self-diagnostics features, 5V and 3V3 compatible, 14-bit output resolution, 48-bit ID Number Triaxis™ Position Sensor IC
MLX90609
High resolution and dynamic range, Digital SPI and Analogue outputs, Low acceleration and angular rate cross sensitivity, Low zero rate output drift, High performance MEMS sensor, Programmable bandwidth, EEPROM serial number, On-chip calibration Triaxis™ Position Sensor IC
MLX91204
Triaxis™ technology, Excellent matching of sensitivity along the two axes, 1° maximum angle error from -40°C to +125°C, Very high sensitivity, Low quiescent current, Fabricated in standard CMOS technology, Very low hysteresis Triaxis™ Position Sensor IC
Please visit the
Linecard
section to view our other supplier pages.